Product Details

Rated current: 16A~3200A

Pole: 4P

Automatic Transfer Switch (ATS) Manual Instruction YES1 series GA model

Notice:

Before you operate this Automatic transfer switch (hereinafter ATS),please read and understand these instructions carefully.

Dangerous

▲Before you install or operate the ATS,please read and understand these instructions carefully.Only the professional ATS personnel can carry out this installation,adjustment, repair and maintenance.

▲Many parts of the ATS, including printed circuit boards, when it work on-line voltage, cannot touch these parts. Use insulated tools only.

▲Do not touch the components which not protected.

▲Before maintenance the line of ATS, we should take the following preventive measures:

- Disconnect all power.

- Put a "prohibited closing" signs before the locate of the switch

- Switch to "0" position and then hang padlock.

Warning

Inconsistent with the line voltage:

Before Power and configuration for the ATS , we must ensure the line voltage is in the scope of the power supply voltage in the name plate of the ATS If the line voltage and power supply voltage range is different ,it will damage the ATS.Using it not according to the instructions it will damage the equipment.

Check and install

■ ATS delivery
Check and make sure the product is the ordering products.

■ Check the voltage
Check and make sure the voltage and the working voltage of the ATS.
Whether it is in the scope of the voltage.

■ Install the ATS
Install the ATS according this manual instruction.
Install all the external accessories.

■ Wiring the ATS
Connect the bus bar of the switch which coincided with the rated current.
Connect the control wire and outside indication well according to the manual instruction.

Product Parameters

Type and meaning

Main technology parameters

Frame class		100									250			1600						3200
Agreed heating current Ith(A)		63							100		160~3200
Rated current In(A)		16	20	25	32	40	50	63	80	100	125	160	250	400	630	800	1000	1250	1600	2000	2500	3200
Rated insulation voltage(Ui)		690V														800V
Rated concussion withstand voltage(Uimp)		8KV
Rated working voltage(Ue)		AC400V
Rated working current (le)		16	20	25	32	40	50	63	80	100	125	160	250	400	630	800	1000	1250	1600	2000	2500	3200
Using category		AC-33B														AC-33iB
Rated short-circuit connection capacity		8KA									26KA					67KA
Rated short-time withstand current(Icw)		5kA/30ms									12.6kA/60ms					32kA/60ms
Transfer time Ⅰ-Ⅱ or Ⅰ-Ⅱ		2.5s									0.6s					1.2s			1.8s			2.4s
Control voltage		DC24V, 48V, 110V, AC220V
Rated frequency	Start	20W									325W			355W		400W	440W			600W
	Norma										62W			74W		90W	98W			120W
Weight(kg) 4Pole		3.4									6		7.6	15.8	16.8	36	36	37	38.6	55	61	67

Switch structure explain

① Electric key lock:Control the inside controlling line power supply of the switch,when the Electric lock open,the switch could be operated automatically and remotely, when the electric lock closed,the switch could be operated by handle only.

② Operating handle: When operate the switch by the operating handle, the electric lock must be closed.

③ Mechanic padlock:When inspection,firstly turn the switch to the"0" position by operationhandle,then pull the padlock mechanism and close the padlock,then the inspection can be arranged:(Pull the mechanism padlock will cut off the inside controlling power supply of the switch.The switch couldn't be inelectric position and also couldn't be manual operation.

④ Position indication:It means the position of the switch working estate (Ⅰ,0,Ⅱ)

⑤ Controlling voltage: AC220V

Outline and installation dimensions

16A~1600A installation diagram ( 2 input 1 output )

16A~1600A installation dimensions( 2 input 1 output )

Specification	Total dimension								Switch installation												Connection terminal
Specification	A	A1	B	B1	C	E	G	H	J	K	L	M	N	P	R	S	S1	T	T1	U	V	ΦX	Y	Y1	Y2
16~100A	270	245	110	103	170	142	115	146	226	84	7	44	81	30	14	18	23	2.5	5	103	12	6	40.5	92	67.5
125~160A	348	305	147	142	224	190	144	185	284	102	7	49	91	36	20	25	37	3.5	/	127.5	19	9	56	127.5	127.5
250A	411	368	170	142	224	190	144	200	347	102	7	49	91	50	25	29	40	3.5	/	141.5	28	11	56	130	130
400A/3P	525	374	234	222	305	268	250	290	354	179	9	96	91	65	32	37	52	5	/	222	38	11	83	193	193
400A/4P	585	435	234	222	305	268	250	290	415	179	9	96	91	65	32	37	52	5	/	222	38	11	83	193	193
630A/3P	525	374	250	222	305	268	250	290	354	179	9	96	91	65	40	45	61	6	/	222	38	12	83.5	193.5	196
630A/4P	585	435	250	222	305	268	250	290	415	179	9	96	91	65	40	45	61	6	/	222	38	12	83.5	193.5	196
800~1000A/3P	785	520	328	250	390	326	360	/	496	220	11	115	84	120	60	64	88	8	/	250	56.5	13	109	254	254
800~1000A/4P	1080	635	328	250	390	326	540	/	610	220	11	115	84	120	60	64	88	8	/	250	60.5	13	109	254	254
1250A/3P	785	520	336	250	390	326	360	/	496	220	11	115	84	120	80	68	100	8	/	250	56.5	13	109	254	254
1250A/4P	1080	635	336	250	390	326	540	/	610	220	11	115	84	120	80	68	100	8	/	250	60.5	13	109	254	254
1600A/3P	785	520	336	250	390	326	360	/	496	220	11	115	84	120	80	68	108	10	/	250	56.5	13	110	255	255
1600A/4P	1080	635	336	250	390	326	540	/	610	220	11	115	84	120	80	68	108	10	/	250	60.5	13	110	255	255

16A~1600A installation diagram ( 2 input 2 output )

1000A~1600A installation diagram

16A~1600A installation dimensions ( 2 input 2 output )

Specification	Total dimension								Switch installation										Connection terminal
Specification	A	A1	B	B1	C	E	G	H	J	K	L	M	N	P	R	S	T	U	V	ΦX	Y	Y1
16~100A	270	245	106	103	170	142	115	146	226	84	7	44	81	30	14	18	2.5	103	12	6	40.5	92
125~160A	348	305	135	142	224	190	144	185	284	102	7	49	91	36	20	25	3.5	127.5	19	9	56	127.5
250A	411	368	159	142	224	190	144	200	347	102	7	49	91	50	25	29	3.5	141.5	28	11	56	130
400A/3P	525	374	234	222	305	268	250	290	354	179	9	96	91	65	32	37	5	222	38	11	83	193
400A/4P	585	434	234	222	305	268	250	290	414	179	9	96	91	65	32	37	5	222	38	11	83	193
630A/3P	525	374	250	222	305	268	250	290	354	179	9	96	91	65	40	45	6	222	38	12	83.5	193.5
630A/4P	585	434	250	222	305	268	250	290	414	179	9	96	91	65	40	45	6	222	38	12	83.5	193.5
800~1000A/3P	785	520	328	250	390	326	360	/	496	220	11	115	84	120	60	64	8	250	56.5	13	109	254
800~1000A/4P	1080	635	328	250	390	326	540	/	610	220	11	115	84	120	60	64	8	250	60.5	13	109	254
1250A/3P	785	520	336	250	390	326	360	/	496	220	11	115	84	120	80	68	8	250	56.5	13	109	254
1250A/4P	1080	635	336	250	390	326	540	/	610	220	11	115	84	120	80	68	8	250	60.5	13	109	254
1600A/3P	785	520	336	250	390	326	360	/	496	220	11	115	84	120	80	68	10	250	56.5	13	110	255
1600A/4P	1080	635	336	250	390	326	540	/	610	220	11	115	84	120	80	68	10	250	60.5	13	110	255

2000A~3200A installing dimensions

Specification	A	A1	B	G	J	R	S	T	V	Y1	Y2
2000A/3P	785	537	423	360	496	80	81	10	56	113	121
2000A/4P	1080	651	423	540	610	80	81	10	72	113	121
2500A/3P	785	537	433	360	496	80	81	15	56	118	116
2500A/4P	1080	651	433	540	610	80	81	15	72	118	116
3200A/3P	785	537	443	360	496	80	81	20	56	123	111
3200A/4P	1080	651	443	540	610	80	81	20	72	123	111

Manual instruction

1. GA1 type Economic ATS manual instruction(Fit for rated current:16A-100A)

Note: Please pay attention to Main power and Emergency power phase sequence corresponding relation when you are wiring the switch.

2. GA type fire type ATS manual instruction(Fit for rated current:16A-3200A)

Note: Please pay attention to Main power and Emergency power phase sequence corresponding relations when you are wiring the switch.

GA type ATS using manual (Fit for 16A-3200A fission type)

Note: Controller manual instruction please to see the Y-701/702 user manual

Method of terminal connection

Correct installation method of the switch

Product Choice

Model	Type
	YES1-100GA	YES1-250GA	YES1-630GA	YES1-1600GA	YES1-3200GA
Rated Current(Amp)	16A～100A	125A～250A	315A～630A	800A～1600A	2000A～3200A
Rated Insulation Voltage	690V			800V
Rated Impulse with Stand Voltage(KV)	8 KV
Rated Working Voltage	AC400V
Usingzation Category	AC - 33B			AV - 33iB
Rated Short-Time with Stand Current	5KA/30ms	10KA/60ms	12.6KA/60ms	21KA/60ms
Transfer Time	2.5s	0.6s		1.2s～2.4s
Control Power Voltage	DC24V、48V、110V AC220V
Vote Number	Double Throw
Wiring Manner	Panel Mounting
Pole	4P
Weight(kg)	3.4	7.6	16.8	38.6	67

Precautions

Wiring methods of the switch

1. The primary wiring diagram to see the picture 3.

2. The control power is derived from normal power, emergency power cand N phases.

3. Ⅰ andⅡ line control power AC220V connected with terminal 102~103,104~105 respectively, 102 and 104 are normal power and emergency power live line respective.

4. Terminal 101,106 are act as signal lamp to control the power supply. Note:101 and 106 couldn't be connected with any other lines.

5. When above (under) input line, under (above) terminalⅠand Ⅱ line A, B, C phases will be connected with copper lines or lines acting as output.

The instruction of debug the switch

1. Connect the normal power (Ⅰ),emergency power(Ⅱ) to the corresponding copper bar respectively;

① Automatic debugging

Normal power supply with electric,emergency power supply with Electric,switchⅠline switch on
Normal power supply without electric,emergency power supply with electric,switch Ⅱswitch on
Normal power supply with electric,switchⅠ line switch on
(Refer to the switch panel white indicating arrowhead)

② Remote debugging

Press the bush button SB1,then the switchⅠline switch on
Press bush button SB2,then the switch Ⅱ line switch on

③ Automatic/Remote(Manual)debugging

When dial the function selection switch to the automatic position: the switch should act as the ① item required
When dial the function selection switch to the remote (manual) position, the switch should act as the ② item required

2. When the switch is in the position of switch onⅠline or Ⅱ line,the signal lamp on the panel should indicate correspondingly;

3. After finished the debugging,close the power supply firstly,and transfer the switch to the "0" position by handle. (Middle position,refer to the switch panel white indicating arrowhead).

To Be The Global Leading

GA series 16A-3200A integral type three working positions ATSE with fire-fighting function automatic transfer switches with 2p/3p/4p